Table of Contents
Advertisement
1. Turn the power on and remove the disc in the tray.
2. To put the HDD & DVD into the HDD mode, press
[HDD] on the remote control unit.
3. To put the HDD & DVD into version up mode,
press [VARIABLE SKIP], [6], [5], and [4] buttons
on the remote control unit in this order within three
seconds. The tray will open automatically.
Fig. a appears on the screen and Fig. b appears
on the VFD.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Please insert a disc.
Fig. a Update Mode TV Screen
Fig. b VFD Display in Update Mode
4. Load the disc for version up.
Fig. c appears on the screen. The file on the top is
highlighted as the default.
When there is only one file to exist, Step 5 will
start automatically.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Disc name
VOL_************
is displayed.
************
************
************
************
Fig. c Update Disc TV Screen
FIRMWARE RENEWAL MODE
ver. *************
Current
F/W version
is displayed.
ver. *************
Files included
in the disc are
displayed.
1 / 1
5. Select the firmware version pressing arrow
buttons, then press [ENTER/OK].
Fig. d appears on the screen and Fig. e appears
on the VFD. The DVD recorder starts updating.
About VFD indication of Fig. e:
1) When Fig. d is displayed on the screen, "F-UP"
is displayed on the VFD.
2) When "Firmware Updating... XX% Complete."
is displayed on the screen, BE version number
is displayed on the VFD such as 194000.
* Firmware Version differs depending on the
models, and this indication is one example.
Firm Update Mode
Selected
************
F/W version
is displayed.
(*1)
File Loading...
Fig. d Programming Mode Screen
Fig. e VFD in Version Up Mode (Example)
The appearance shown in (*1) of Fig. d is
described as follows.
No.
Appearance
1
File Loading...
Firmware
2
Updating...
XX% Complete.
Firmware
---
Update Failure
6. After updating is finished, the tray opens
automatically.
At this time, no button is available.
7. Pull out the AC code once, then insert it again.
1-11-1
ver. *************
State
Sending files into the memory
Writing new version data
Failed in updating
E3TF0FW
Hide quick links:
Advertisement
Table of Contents
