FUNAI W4D-D4180DB Owner's Manual page 63

E9G04ED_EN.book Page 63 Tuesday, March 27, 2007 10:27 AM
Dynamic Range Control (Default: ON)
Set to "ON" to make the dynamic range narrower.
Select a setting using [U / D], then
press [ENTER].
Dynamic Range Control
ON
OFF
Your setting is activated.
The Dynamic Range Control function is effective
only with analogue audio connection.
Note
• The Dynamic Range Control function is available
only on discs recorded in the Dolby Digital format.
PCM sampling (Default: 48kHz)
Select a setting using [U / D], then
press [ENTER].
PCM
48kHz
96kHz
Your setting is activated.
48kHz: If your amplifier / decoder is NOT compatible
with 96 kHz PCM, select "48kHz". Sound
recorded at 96 kHz is down sampled to
48 kHz.
96kHz: If your amplifier / decoder is compatible with
96 kHz PCM, select "96kHz". Sound is
sampled at 96 kHz.
Note
When playing back a disc with copyright protection:
• Even if you select "96kHz", the sound is down
sampled to 48 kHz.
Dolby Digital conversion (Default: Stream)
Select a setting using [U / D], then
press [ENTER].
Dolby Digital
PCM
Stream
Your setting is activated.
PCM: Converts the Dolby Digital into PCM
(2 channel).
If your amplifier / decoder is NOT compatible
with Dolby Digital, set to "PCM".
Stream: Outputs Dolby Digital signals.
If your amplifier / decoder is compatible with
Dolby Digital, set to "Stream".
Hint
When playing back a DVD-RW disc recorded in VR
mode:
• If the audio source on a disc is in Dolby Digital
format, set "Dolby Digital" to "PCM" so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.
Settings for MPEG (Default: PCM)
Select a setting using [U / D], then
press [ENTER].
MPEG
PCM
Stream
Your setting is activated.
PCM: Converts MPEG into PCM.
If your amplifier / decoder is NOT compatible
with MPEG, set to "PCM".
Stream: Outputs MPEG Audio signals.
If your amplifier / decoder is compatible with
MPEG, set to "Stream".
3. Disc Menu Language (Default: English)
Set the Disc Menu language.
Select a language using [U / D],
then press [ENTER].
Disc Menu Language
English
German
Russian
Czech
Hungarian
Polish
Romanian
Bulgarian
Other
Your setting is activated.
4. Audio Language (Default: Original)
Set the Audio language.
Select a language using [U / D],
then press [ENTER].
Audio Language
Original
English
German
Russian
Czech
Hungarian
Polish
Romanian
Bulgarian
Other
Your setting is activated.
If "Original" is selected, the audio language is the
default of the inserted disc.
5. Subtitle Language (Default: OFF)
Set the Subtitle language.
Select a language using [U / D],
then press [ENTER].
Subtitle Language
OFF
English
German
Russian
Czech
Hungarian
Polish
Romanian
Bulgarian
Other
Your setting is activated.
63
EN