Flags (Bmp ® 21-Plus Only) - Brady BMP 21-PLUS User Manual

Flags
®
(BMP 21-PLUS only)
A Flag label wraps around a wire or cable, with the ends joined together to form a flag. The
Flag label type is designed to work with any media except SelfLam or Permasleeve.
To use a Flag label type:
Press LABEL TYPE
1.
Navigate to Flag and press Enter
2.
Data fields display requesting additional information.
In the Flag Length: field, enter the total length of the flag (as it exists before being
3.
wrapped around a wire or cable).
In the Cable Diameter: field, enter the diameter measurement of the cable to which the
4.
flag will be applied.
The range for the cable diameter is 0.25 inches (6.35mm) to 8 inches (203.2mm). By entering
the diameter of the wire or cable, the system automatically calculates an additional length of
label to allow complete wrap of the wire/cable with additional label material left for the flag.
Flag data fields
.
.
Flag label on print out
BMP ® 21-PLUS/BMP ® 21-LAB User's Manual
®
Flags (BMP 21-PLUS only)
65