Table Of Contents; Regulatory Information; Technical Data - Jøtul FS 162 Installation And Operating Instructions Manual

ENGLISH
Contents
1.0 Regulatory information .......................... 20
2.0 Technical data ......................................... 20
3.0 Before installation ................................... 21
4.0 Installation ............................................... 21
5.0 Installation completed .......................... 24
Figures ............................................................
Product:
Jøtul
Room heater fired by solid fuel
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
Emission of CO in combustion products :
Flue gas temperature :
Nominal heat output :
Efficiency
:
Operation range :
Fuel type :
Operational type :
The appliance can be used in a shared flue.
Country Classification Certificate/ Approved by
standard
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
20
Serial no.

1.0 Regulatory information

Jøtul FS 162 - 370 is a freestanding product, which can be
positioned against inflammable walls at the distances described
in Fig. 1A.
The installation of a fireplace must take place in accordance with
each country's laws and regulations. All local ordinances must
also be complied with when products are installed.
Installation instructions for the stove accompany the surround.
Installation and operating instructions for the fireplace insert
accompany the insert. For day-to-day use, maintenance, service
work, etc. see the General use and maintenance instructions.
Contact your local building authorities regarding restrictions and
installation requirements.
45
The installation can only be taken into use after it has
been inspected and found to be in good order by qualified
personnel.
The product has been tested and documented as a freestanding
stove in accordance with EN 13240.
The rating plate for the freestanding product comes with the
installation instructions for the surround. It should be positioned
in a suitably visible place.

2.0 Technical data

Two options are available for the product:
Standard
Standard with additional height
Material:
Finish, burn chamber:
Type of fuel:
Max. log length:
Smoke outlet:
Flue pipe dimension:
External air connection:
Weight, burn chamber, approx.:
Weight, surround, approx.:
Weight, additional height, approx.:
Height:
Height, additional height:
Diameter
Minimum distance to ceiling:
Product dimensions, distances:
Technical data according to EN 13240
Nominal heat output:
Flue gas mass flow:
Recommended chimney draught:
Efficiency:
CO emission (13% O
Flue gas temperature:
Operational type:
Intermittent combustion in this context means normal use of the
fireplace, i.e. fuel is added as soon as the fuel has burnt down to
a suitable amount of embers.
The product is fitted with a vent which must be open during
normal heat production to ensure an adequate supply of air. The
vent may be closed after the fire has burned down and the stove
will continue to radiate heat for many hours.
Soap stone
Black/grey paint
Wood
30 cm
Top, rear
Ø 150 mm/min. 177 cm
cross section
Alu. flex - Ø 100 mm
5,5 kW
5,9 g/s
12 Pa
73%@5,8 kW
): 0.12%
2
o
330 C
Intermittent
2
120 kg
314 kg
61 kg
1 580 mm
365 kg
603 mm
300 mm
See Fig. 1