Engine Maintenance Mode - Oki OKIPAGE 6e Service Manual

Engine Maintenance Mode

Note: This mode is used only by service persons, and it should not be released to the end
users.
To enter into the engine maintenance mode, turn the POWER switch on while holding the
FORM FEED and ENTER keys down.
Function
There are following functions :
• Head drive time setting
• Printing start position setting
• Drum count display
• LED head width setting
• Transfer current setting
• Setting of strobe time
• Selection of standby temperature
• Engine test
Note: "Printing start position setting" is for shipping. Do not change its default value.
Detailed descriptions of these functions are provided in Appendix C, DIAGNOSTICS
TEST.
Adjustments
• Drum count total display
• Engine reset
• Factory adjustment
• LED head type setting
(Adjustment method for adjustment head)
• Optical LED head (Mounting head type)
4 - 3
Service Manual, P/N 59276401
OKIPAGE 6e/6ex