Saving A Performance; Deleting Imported Samples - Roland XPS-10 Owner's Manual

Importing a Sound and Playing it on the Keyboard (SAMPLE IMPORT)
4.
Use the CURSOR [ K ] [ J ] buttons to select a parameter,
and edit the value for part 1.
Part Parameter
CURSOR [ K ] [ J ]
[SHIFT] +
CURSOR [ K ] [ J ]
PATCH NO
(Patch No)
LEVEL
KBD SWITCH
(Keyboard
switch)
1–16
RANGE
LOWER
(Keyboard
Range Lower)
RANGE UPPER
(Keyboard
Range Upper)
OCTAVE SHIFT -3–3
For this example, turn the KBD SW setting ON.
MEMO
For more about performance parameters, refer to p. 25
You can make settings for other parts in the same way, and create the
following assignments. Hold down the [SHIFT] button and use the CURSOR
[ K ] [ J ] buttons to switch parts; then repeat steps 1–4.
Sp501:TEST1 Sp502:TEST2
(Part1) (Part2)
If the key range overlaps between parts, those keys will play both sounds.
You can recall a saved performance by using the XPS-10's [PERFORM]
button.

Saving a Performance

A performance you've edited is temporary; it disappears if you turn off the
power or select another performance. If you want to keep a performance
that you've edited, you must save that performance (p. 27).
24
Value Explanation
VALUE [-] [+]
Number of the PATCH that's
—
assigned to each part
Volume of each part
This is used mainly to adjust
0–127
the volume balance between
parts.
Turns on/off each part's
connection between the
OFF,ON
controller section and the
internal sound engine
Lowest key of the range
C-1–(UPPER)
sounded by each part
Highest key of the range
(LOWER)–G9
sounded by each part
Shifts the keyboard pitch range
of each part in one-octave
units.
C4
I
Sp503:TEST3 Pf001:88StageGrand
(Part3) (Part4)

Deleting Imported Samples

1.
Press the [MENU] button; in the Menu screen, choose
"SAMPLE DELETE" and press the [ENTER] button.
2.
Use the VALUE [-] [+] buttons to select the sample (patch)
that you want to delete, and press the [ENTER] button.
A confirmation message appears.
3.
Press the [ENTER] button once again.
The sample is deleted.
NOTE
. Some or all notes of performances that use the deleted sample (patch)
will no longer sound.
. It's a good idea to back up important data to a USB flash drive or to
your computer (p. 33).