Cleaning And Maintenance - Capresso 5-Cup minidrip Instructions Manual

6. Press "ON/AUTO/OFF" button, the "ON" indicator will illuminate green. The
appliance will begin brewing.
Caution: Never open the water container lid as long as coffee is brewing.
Hot water could spill out causing burns. Wait until the brewing noise stops
before lifting lid.
7. The brewing process can be interrupted by pressing the "ON/AUTO/OFF"
button twice at any time during operation, and the "ON" indicator will turn off.
The appliance will continue brewing once "ON/AUTO/OFF" is pressed again.
Note: You can remove the carafe from the platform during the brewing
process for approximately 30 seconds to pour a cup before brewing is finished.
8. Immediately after brewing is finished there could still be hot water in the filter
passing through the ground coffee. This can take 1 to 3 minutes to pass
through depending on how much coffee you used and how fine the coffee
was ground. Wait until all brewed coffee is in the carafe before serving.
9. When the brewing is finished, the machine will keep the warming plate hot
for 2 hours before automatically shutting off. To turn machine off after brewing
press the "ON/AUTO/OFF" button twice until no indicator lights are illuminated.
For optimum coffee taste, serve coffee just after brewing.
10. If you want to make another carafe of coffee immediately after the first pot,
make sure the machine is off and allow it to cool down for five minutes
before refilling the water tank. Important: Make sure the carafe and filter
basket are empty before brewing.
11. Always turn the coffee maker off and unplug the power cord from the
electrical outlet when the coffee maker is not in use.
Cleaning & Maintenance
Caution: Be sure to unplug the appliance and allow it to cool down before
cleaning. To protect against electrical shock, do not immerse cord, plug or
unit in water or liquid. After each use, always make sure plug is first removed
from wall outlet.
1. Clean all detachable parts after each use in hot, soapy water. Make sure
the drip stop in the filter holder is free of any coffee particles; otherwise it
might not close properly when removing the carafe. Clean the filter and
carafe after each use to ensure best tasting coffee every time.
2. Wipe the product's exterior surface with a soft, damp cloth to remove
stains. Never use scouring agents or harsh abrasive cleaners.
3. Water droplets may buildup in the area above the filter and drip onto the
product base during brewing. To control the dripping, wipe off the area with
a clean, dry cloth after each use of the product.
4. Use a damp cloth to gently wipe the heating platform (Fig. 1, H). Never use
abrasive cleaner to clean the heating platform.
5. Dry all parts fully before placing back into the machine.
Decalcifying
To keep your coffee maker operating efficiently, it is important to decalcify at
least every 2-4 months depending on local water hardness or when brewing
5 cups takes more than 10 minutes.
1. Before decalcifying, remove the filter from the machine.
7.