Draytek Vigor 2760 Series Quick Start Manual page 13

Interface
PWR
I / O
Factory Reset
WLAN
ON/OFF/WPS
VDSL/ADSL
USB (1-2)
LAN (1-4)
Description
Connector for a power adapter.
Power switch.
Restore the default settings. Usage: Turn on the
router (ACT LED is blinking). Press the hole and
keep for more than 5 seconds. When you see the
ACT LED begins to blink rapidly than usual, release
the button. Then the router will restart with the
factory default configuration.
WLAN WPS - Press this button for 2 seconds to wait
for client device making network connection through
WPS. When the LED lights up, the WPS connection
will be on.
WLAN ON/OFF - Press the button once to enable
(WLAN LED on) or disable (WLAN LED off)
wireless connection.
Connector for accessing the Internet.
Connector for USB storage device or printer or
3G/4G backup.
Connectors for local network devices.
5
Vigor2760 Series Quick Start Guide