Printing Jobs - Kyocera KM-3050 Operation Manual

Canceling Jobs with the Stop Key
OPERATION GUIDE
4
Repeat steps 2 and 3 to cancel other jobs.
You can also cancel jobs by pressing the
Cancelling jobs by pressing the Stop key differs in detailed procedures
depending on the content of Reserve Next Priority Settings.
If Reserve Next Priority Setting is set to On

Printing jobs

The Copy function default screen appears on the touch panel during
printing.
1
Press the Stop key.
Cancelling job
screen appears.
The current print job
is temporarily
interrupted.
2
To cancel printing, select [Cancel], and then press [Yes] in the confirmation
screen.
To restart a job, press [Resume All Print Jobs].
NOTE:
If the machine is left for 60 seconds, Cancelling job screen is
automatically closed, and paused printing job resumes.
Pressing the Stop key during scanning originals cancels the scanning
operation.
Sending jobs
You cannot temporarily stop a sending job, that is already being executed,
even by pressing the Stop key.
1
Press the Stop key.
A status screen is displayed.
2
To cancel printing, select [Cancel], and then press [Yes] in the confirmation
screen.
To restart a job, press [Close].
Stop
Ready to copy.
Copy Image
Set Original.
Auto
Zoom
Original
Zoom
1-sided Text+Photo
Paper
>>1-sided
Duplex
Preview
Quick Setup Org./Paper/ Image
Finishing Quality
Status
Basic Operation
key.
Copies
Interrupt
Normal 0 A4
Plain
Density Paper
Selection
Collate
Original Collate/
Image Offset
Layout/Edit Advanced
Setup
10/5/2006
3-57
1
10:10