Kyocera KM-3050 Operation Manual page 182

Troubleshooting
Error Message
Send error.
Job is canceled. Press
[End].
####
Set the folding tray.
Set the folding unit.
Set the punch waste
box.
Set the waste toner
box.
6-10
Checkpoints
–
Is the folding tray correctly
installed to the 3,000-sheet
capacity document finisher?
Is the folding unit correctly
installed to the 3,000-sheet
capacity document finisher?
–
–
Corrective Actions
2101, 2102, 2103, 2201, 2202, 2203,
3101: The network cable is
disconnected or the hub that it is
connected to is not operating
properly. Check the cable and the
hub. Otherwise, the server name or
the host name of the SMTP server is
not set correctly. Use COMMAND
CENTER and register the SMTP
server name and the host name
correctly.
2204: The E-mail size exceeds the
acceptable send data capacity.
Decrease the size or resolution of the
scanned data to be transmitted and
resend the E-mail.
5101, 5102, 5103, 5104, 7102, 720f:
Turn the main power switch off and
back on. If this error occurs several
times, make a note of the displayed
error code and contact your service
representative.(Refer to the
corrective action for the error
message " An error has occurred.")
9181: The scanned original exceeds
the acceptable number of pages of
999. Send the excess pages
separately.
Install the folding tray correctly to the
3,000-sheet capacity document
finisher. For details, refer to the
Operation Guide of the 3,000-sheet
capacity document finisher.
Install the folding unit correctly to the
3,000-sheet capacity document
finisher. For details, refer to the
Operation Guide of the 3,000-sheet
capacity document finisher.
The punch waste box of the
document finisher or 3,000-sheet
capacity document finisher is not
installed correctly.
Follow the instruction on the touch
panel to set the punch waste box
correctly.
The waste toner box is not installed
correctly. Set it correctly.
Reference
Page
2-15
—
—
—
—
—
5-7
OPERATION GUIDE