Brinkmann 810-6420-S Assembly And Operating Instructions Manual page 23

Left Front Leg Cap
Left Rear Leg Cap
Left Rear
Leg
Right Front
Cart Leg
Wheel
Washers
Cotter Pin
Left Front Leg
Tank Support
Bracket
Right Rear
Cart Leg
Wheel
Step 3
Step 4
Step 5
Wheel
Axle
Bolt
Note: With the help of a friend,
turn the cart upside down.
Try to minimize the stress
to the legs.
Install left rear leg cap onto left
rear cart leg. Then install left front
leg cap onto left front cart leg as
illustrated.
Back
Note: Align the sticker on rear leg
cap with sticker on rear leg.
To install the tank support bracket
to the right rear and front legs,
using four M5 X 10 mm bolts as
illustrated.
Note The end of the support
bracket marked, "F" goes
toward the front of the cart,
and "B" goes toward the
back of the cart.
To install the wheels, insert
wheel axle bolts through wheels,
wheel washers, right rear and right
front cart legs as illustrated. Insert
cotter pins to secure.
22