Brinkmann 810-6420-S Assembly And Operating Instructions Manual page 22

Choose a good, cleared assembly
area and get a friend to help you
put your grill together. Lay card-
board down to protect grill fi nish
and assembly area.
CAUTION: Some parts may
contain sharp edges.
Wear protective
gloves if necessary.
Step 1
Attach left and right cart legs
to front panel using four
#8 self-tapping screws.
Step 2
Attach rear cart brace onto
pre-attached bolts on rear cart legs
by placing key holes over bolts.
Slide rear cart brace downward
and tighten bolts securely (Figure
1 & 2).
Figure 1
21
Figure 2
Rear Cart Brace