Advertisement
important
Safety
instructions
iMPORTANT
iNSTRUCTiONS
FOR CLEANING
YOUR RANGE
Before
manually
cleaning
any part
of the
range, be sure aii controls
are turned
OFF and the range is
COOL. The range may be hot and can cause burns.
* Clean the range regularly
to keep all parts free of grease
that could catch fire. Pay particular
attention
to the area
around each surface
burner. Do not allow
grease to
accumulate.
* Kitchen
cleaners
and aerosols m Always
follow the
manufacturer's
recommended
directions for use. Be
aware that excess residue from cleaners
and aerosols
may ignite causing damage
and injury.
* Clean ventilating
hoods frequently
--
Grease should
not
be allowed
to accumulate
on the hood or filter.
Follow
the manufacturer's
instructions for cleaning
hoods.
Conversion to L.P.Gas
Personal
injury or death from electrical
shock may occur if the range is not installed by a quallfied
installer or electrician.
Any additions,
changes or conversions
required
in order for this appliance
to satisfactorily
meet
the application
needs must be made by a qualified
technician.
Grounding
instructions
Avoid fire hazard
or electrlcal
shock.
DO
NOT use an adapter
plug, an extension cord, or remove
grounding
prong from electrlcal power cord. Failure to
follow this warning
can cause serious injury, fire or death.
This appliance
is equipped
with a 3-prong
grounding
plug
for your protection
against
shock hazard
and should be
plugged
directly
into a properly
grounded
receptacle.
DO
NOT cut or remove the grounding
prong from this plug.
For personal
safety, the range must be properly
grounded.
For maximum
safety, the power cord must be plugged
into
an electrical
outlet that is correctly
polarized
and properly
grounded.
If a 2-prong
wail receptacle
is the only available
outlet,
it is the personal
responsibility
of the consumer
to have it
replaced
with a properly
grounded
3-prong
wall receptacle
installed by a qualified
electrician.
See the INSTALLATION
INSTRUCTIONS
packaged
with this
range for complete
installation and grounding
instructions.
Grounding
type
wall rece
This appliance
allows for conversion
to Liquefied
Petroleum
(L.P.) Gas.
If L.P.conversion
is needed, contact
your
local L.P. Gas
provider
for assistance. The L.P. conversion
kit is provided
with this appliance
and is located
on the lower REAR (back
side) panel of the range. Before installing the kit be sure to
follow
the L.P. Installation
Instructions
carefully.
Power supply cord
with 3-prong
grounding
plug
Product Record
In this space below, record the date of purchase,
model and
serial number of your product.
You wiii find the model and
serial number
printed
on an identification
plate.
See bottom
of this page for serial plate location.
Model
No.
790.
Serial No.
Date of Purchase
Save sales receipt for future reference.
Serial Plate Location
Open
broiler
drawer
(some models)
or
storage drawer
(some models).
Advertisement
