Advertisement
Care and Cleaning
Removing
and replaclng
the llft-off
oven door
To avoid
possible
injury when removing
or
replacing
the oven door, follow
the instructions
below
carefully
and always
hold the oven door with
both hands positioned
away
from the door hinge area.
The door
is heavy.
For safe, temporary
stor-
age,
lay the door fiat with the inside of the door facing
down.
Oven door
hinge
locations
To remove
oven door:
1.
Open
oven door completely
(horizontal
with floor
- See
Fig. I).
2.
Pull the door hinge locks on boSh left and right door
hinges down from the oven frame
completely
towards
the
oven door
(See Fig. 2). A tool such as a small flat-blade
screwdriver
may be required.
3.
Firmly grasp
both
sides of oven door along
the door sides
(Do not use the oven door handle
- See Fig. 3).
4.
Close the door to the broil
stop position
(the oven door
will stop into this position
just before
fully
closing).
5.
With
the oven door in the broil stop position,
lift the oven
door
hinge arms over the roller
pins located
on each side
of the oven frame
(See Fig. 4).
To replace
oven door:
1.
Firmly grasp
both
sides of oven door along
the door sides
(Do not use the oven door handle
- See Fig. 3).
2.
Holding
the oven door at the same angle
as the removal
position,
seat the hook of the hinge arm over the roller
pins located
on each side of the oven door
frame
(See
Fig. 4). The hook of the hinge arms must be fully
seated
onto the roller
pins.
3.
Fully open the oven door
(horizontal
with floor
- See Fig.
1).
4.
Push the door
hinge locks up towards
and into the oven
frame
on both
left and right
oven door hinges (See Fig. 2)
to the locked
position.
5.
Close the oven door.
Fig. i
Fig. 2
oven
Fig. 3
Fig. 4
Special
door care instructions
- Most oven doors contain
glass
that can break.
Read the following
recommendations:
"
Do not close the oven door until all the oven racks are
fully
in place.
"
Do not hit the glass with
pots, pans, or any other object.
*
Scratching,
hitting,
jarring
or stressing
the glass may
weaken
its structure
causing
an increased
risk of breakage
at a later time.
roller
pin
"_.
hinge
--
arm
/
/
/
/
/
19
Advertisement
