Table of Contents
Advertisement
Inspection
8
In general, a weekly visual check will meet all the inspection requirements.
9
Ensure that the following are checked:
9.1
Fabric is undamaged and has no signs of sagging.
9.2
The footrest is correctly fitted and latched.
9.3
Both armrests are securely fitted in place.
9.4
Brake mechanism operates freely and, when locked, the chair does not move.
9.5
Footplates and heel slings are undamaged and are correctly fitted.
9.6
Tyres are in good order and the wheels are not damaged.
9.7
If stabilisers are fitted, they are firmly locked in place.
9.8
Check that quick release spindle releases and locks correctly.
10
Check the finish of the chair for any damage.
Note:
Some finishes are unique to the chair. Check with INVACARE Ltd. for details.
11
Check that all bungs/plugs and handgrips are fitted and undamaged.
Tools
12
The following list details the basic tools required to carry out the maintenance procedures detailed in the following
sub-chapters.
12.1
Pliers
12.2
Drills (Metric and Imperial)
12.3
Spanners (Metric and Imperial)
12.4
Pozidriv screwdriver
12.5
Thin flat bladed screwdriver
12.6
Adjustable spanner
12.7
Torque wrench (20 to 40 lbf.ft rating)
12.8
Set of Allen keys (Metric and Imperial)
12.9
Protected jaw grips
12.10 Nylon mallet
12.11 Pop rivet gun
Note:
The above list is not exhaustive.
11/03
MAINTENANCE
Page 2.5
Advertisement
Table of Contents
