Table of Contents
Advertisement
8
To remove the canvas from the reclining backrest (Fig 2.1.3) proceed as follows:
8.1
Remove the Push Handle Bar (2) from the Backrest Frame (3) by depressing the Spring Clips (7).
Note:
It may be necessary to use pliers or a similar tool to extract the Spring Clips.
8.2
Remove the Pozi head screws (5) and washers (4) from the Backrest Frame tube (3).
8.3
Release the Canvas (6) by pulling apart the Velcro seal from the canvas.
8.4
Remove the canvas by sliding it off the Backrest Frame.
Replacing the backrest canvas
9
To replace the backrest canvas is the reverse of the removal, however ensure the following:
9.1
New Nyloc nuts are fitted.
9.2
The securing points are undamaged.
9.3
New cup washers are fitted as required.
9.4
That the backrest canvas is stretched evenly and is taut.
9.5
New Spring Clips are fitted in the Push Handle bar as required.
11/03
MAINTENANCE
Page 2.9
Advertisement
Table of Contents
