Table of Contents
Advertisement
Policy
7
INVACARE Ltd. repair policy is as follows:
Repairs to ANY component other than those detailed in Chapter 2 are not covered. Repairs to ANY metal
work is not generally permitted without express permission of INVACARE Ltd. ALL fasteners i.e. bolts,
Nyloc nuts, and any fastener showing damage MUST be renewed.
Failure to comply with the above absolves INVACARE Ltd. of liability.
Note:
Certain components will require removal to carry out maintenance. With the exception of
fasteners, these components should be refitted.
Technical Details
9
The following data applies to the CELT.
9.1
Available seat widths:
13" to 19" increments.
9.2
Chair depth available (adjusted using a spigot tube):
15", 16" and 17" (other sizes on application).
9.3
Seat to ground height:
19" (standard),17" and 21".
9.4
Wheel types available:
315mm diameter (Transit) and 20", 22" and 24" Self Propelling (Standard and QR).
9.5
Maximum user weight:
20 stone (127 kg), transit and pneumatic self propelling wheel.
18 stone (114.5 kg), solid self propelling wheel.
9.6
Backrest type:
Fixed 3°, 10°, 15° and 20°. Other options are folding and reclining.
9.7
Chair finish:
Polyester powdered coat (Black).
9.8
Transit weight of chair:
Approximately 17kgs (dependant on configuration and seat size).
Types
Options
10
The chair is available in various user defined optional types. For further details refer to
INVACARE Ltd. for details and acceptable combinations.
11/03
INTRODUCTION
Page 1.5
Advertisement
Table of Contents
