Table of Contents
Advertisement
QQ
3 7 63 1515 0
Basic Operations
*
VOLUME + (VOL + on the remote)
qa
, u
unit have a tactile dot.
Before using the unit
To turn on/off the power
European model: Press OPERATE
1
1
Other models: Press POWER
.
To adjust the volume
Press VOLUME +, – (VOL +, – on the remote)
TE
L 13942296513
To listen through headphones
Connect the headphones to the i (headphones) jack
To reinforce the bass sound
2
Press MEGA BASS
.
"MEGA BASS" appears in the display.
To return to normal sound, press the button again.
Playing a CD/MP3 disc
1
Press CD
qd
on the unit (direct power-on).
(On the remote, press OPERATE or POWER
qh
then press FUNCTION
repeatedly until "CD"
appears in the display.)
2
Press Z PUSH OPEN/CLOSE
and place a disc with the label side up on the CD
compartment.
To close the CD compartment, press Z PUSH OPEN/
CLOSE
8
on the unit.
3
Press
u 9
.
The player plays all the tracks/MP3 files once.
When you play a MP3 disc, MP3 indicator lights up
after the player reads the file information.
Audio CD
Track
Playing
number
time
MP3 disc
MP3 file
After the folder name*, song title
www
number
and artist name are displayed,
the playing time** will appear.
*
If there is no folder, "ROOT" appears in the display.
**
If the playing time is more than 100 minutes, it appears "--:--" in
the display.
.
http://www.xiaoyu163.com
To
Press
Pause playback
u 9
. To resume play, press it
again.
Stop playback
x 9
.
Go to the next
> 7
.
track/MP3 file
Go back to the
. 7
.
previous track/
MP3 file
0
Select a folder on
+
on the unit to go forward
an MP3 disc
and
–
Play the selected
MODE
4
folder only (MP3
"FLDR" appears,
disc only)
the unit to select a folder and then
u 9
to start playing.
Locate a point
(forward) or
>
while listening to
7
while playing and hold it until
the sound
you find the point.
Locate a point
(forward) or
>
while observing
7
in pause and hold it until you
the display
find the point.
Remove the CD
PUSH OPEN/CLOSE
Z
unit.
Tips
•
Playback starts from the track/MP3 file you last stopped playing
(Resume play). During stop, the track/MP3 file number to be played
is displayed.
•
To cancel the resume play (to start play from the beginning of the
first track/MP3 file), press
x 9
in stop mode. When you open
the CD compartment or turn off the unit, the resume play is also
canceled.
Example of folder structure and playing
order
The playing order of the folders and files is as follows:
9
and n
qs
on the
CD-R
CD-RW
1
1
2
.
2
qa
.
qf
.
6
0
1
and
Notes on MP3 discs
•
When the disc is inserted, the player reads all the files on that disc.
During this time, "READING" is displayed. If there are many
8
on the unit,
folders or non-MP3 files on the disc, it may take a long time for play
to begin or for the next MP3 file to start play.
We recommend that you do not save unnecessary folders or files
other than MP3 ones in the disc to be used for MP3 listening.
•
A folder that does not include an MP3 file is skipped.
•
Maximum number of files: 255
Maximum number of folders: 150 (including the root folder)
Maximum number of folders and files in total: 256
Maximum directory levels: 8
•
Folder names and file names can be displayed with up to 30
characters including quotation marks.
•
The characters A - Z, 0 - 9, and _ can be displayed on this player.
Other characters are displayed as "_".
•
This player conforms to Version 1.0, 1.1, 2.2, 2.3 and 2.4 of the
ID3 tag format. When the file has the ID3 tag information, "song
title", "artist name" and "album name" can be displayed and
"ID3" appears in the display. If the file does not have the ID3 tag
information, file name appears instead of song title, folder name
appears instead of album name and "no artist" appears instead of
artist name. The ID3 tag information can be displayed with up to 15
characters.
•
When naming, be sure to add the file extension "mp3" to the file
name.
•
If you put the extension "mp3" to a file other than an MP3 file, the
player cannot recognize the file properly and will generate random
noise that could damage your speakers.
•
The file name does not correspond to the ID3 tag.
Listening to the radio
1
Press RADIO•BAND•AUTO PRESET
unit (BAND
qg
on the remote) repeatedly (direct
power-on).
Each time you press the button, the indication changes
as follows:
CFD-S03CPL: "FM" t "MW" t "LW"
CFD-S03CP: "FM" t "AM"
2
Hold down TUNE + or –
0
digits begin to change in the display.
The player automatically scans the radio frequencies
x
ao
and stops when it finds a clear station.
y
If you can not tune in a station, press TUNE + or –
repeatedly to change the frequency step by step.
i
When an FM stereo broadcast is received, "ST"
appears.
Tip
If the FM broadcast is noisy, press MODE
in the display and the radio will play in monaural.
http://www.xiaoyu163.com
SECTION 2
GENERAL
8
Changing the AM/MW tuning interval
If you need to change the AM/MW tuning interval, do
the following:
1
Press RADIO•BAND•AUTO PRESET
unit until "AM" or "MW" is displayed.
2
Press DISPLAY•ENTER
seconds.
3
Press RADIO•BAND•AUTO PRESET
unit for 2 seconds.
"9K STEP" or "10K STEP" flashes.
0
to go backward.
4
Press PRESET + or –
"9K STEP" for 9 kHz interval or "10K STEP" for
on the unit until
10 kHz interval.
0
+ or –
on
5
Press DISPLAY•ENTER
After changing the tuning interval, you need to reset your
(backward)
.
preset AM/MW radio stations.
(backward)
.
Playing a tape
Use buttons on the unit for the operation.
8
on the
1
Press TAPE
qd
on the unit (direct power-on).
2
Press xZ
qs
on the unit, and insert the tape into
the tape compartment with the side you want to
play facing you. Use TYPE I (normal) tape only.
Close the compartment.
Make sure there is no slack in the tape to avoid
damaging the tape or the unit.
Folder
MP3 file
3
Press n
qs
.
The player starts playing.
To
Press
Pause playback
X qs
press it again.
3
Stop playback
xZ qs
Fast-forward or
m
Q Q
3
4
rewind*
rewind)
3
6 7
1 3
Eject the cassette
xZ qs
5
*
When the tape is wound to the end, press
qs
.
M
4
6
7
Recording on a tape
8
Use buttons on the unit for the operation.
1
5
Press xZ
qs
on the unit to open the tape
9
compartment and insert a blank tape with the
side you want to record on facing you. Use TYPE
I (normal) tape only. Close the compartment.
2
Select the program source you want to record.
To record from the CD player, insert a CD and press
CD
qd
.
To record from the radio, tune in the station you want.
3
Press
z qs
on the unit to start recording
(
n
is depressed automatically).
To
Pause recording
Stop recording
Tips
•
Adjusting the volume or the audio emphasis will not affect the
recording level.
•
If the AM/MW/LW program makes a whistling sound after you've
press
z qs
in step 3, press MODE
position of ISS (Interference Suppress Switch) that most decreases
the noise.
•
For the best results, use the AC power as a power source for
recording.
•
To erase a recording, proceed as follows:
1
Insert the tape whose recording you want to erase.
2
Press TAPE
qd
on the unit.
3
Press
z qs
on the unit.
qd
on the
until the frequency
u163
0
.
4
until "MONO" appears
CFD-S03CP/S03CPL
2 9
9 4
2 8
This section is extracted
from instruction manual.
qd
on the
5
on the unit for 2
qd
on the
7
on the unit to select
5
on the unit.
on the unit. To resume play,
on the unit.
or
M
(fast forward or
qs
on the unit.
1 5
0 5
8
2 9
9 4
on the unit.
xZ qs
to release
or
m
Press
X qs
on the unit.
To resume recording, press it
again.
xZ qs
on the unit.
4
on the unit to select the
m
co
9 9
2 8
9 9
5
Advertisement
Chapters
Table of Contents
