How To Initialize The Dvd Player & Vcr - FUNAI D8B-M1000ZB Service Manual

HOW TO INITIALIZE THE DVD PLAYER & VCR
To put the program back at the factory-default,
initialize the DVD player & VCR as the following
procedure.
< DVD Section >
1. Press [DVD], [1], [2], [3], [4], and [DISPLAY]
buttons on the remote control unit in that order.
Fig. a appears on the screen.
" ******* " differs depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : CLEAR
2. Press [CLEAR C.RESET] button on the remote
control unit.
Fig. b appears on the screen.
" ******* " differs depending on the models.
MODEL : *******
Version : *.**
Region : *
EEPROM CLEAR : OK
EEPROM CLEAR : CLEAR
When "OK" appears on the screen, the factory
default will be set.
3. To exit this mode, press [STANDBY-ON] button.
EXIT: POWER
Fig. a
EXIT: POWER
Fig. b
1-8-1 E8GA0INT