Advertisement
CONVERSION
TO NATURAL
GAS
If it becomes necessary to convert the range back to natural gas:
a. Disconnect gas and electrical supply from range.
b. Convert pressure regulator (See step 1), turn cap over so the solid end of cap faces outward.
Place the hollow end d the cap
into the loop end of the dust protector.
c.
Remove the LP orifices using 7mm nutdriver and replace with the original factory installed natural gas orifices at their original
locations (See figure 9 for locations).
d. Convert Oven Burner Orifice for Natural Gas by loosening spud counter-clockwise
(approximately
2-1/2 turns; See step 3).
e. Convert Waist-High Broiler Burner Orifice (Self-Cleaning Models Only) for Natural Gas by loosening spud counter-clockwise
(approximately
1 to 1-1/2 turns; See step 4.)
f.
Readjust "LOW" Setting for Surface Burner Valves following instructions.
(See step 6.)
g. Readjust Oven & Broil BumerAir
Shutters. (See steps 7 & 8.)
Advertisement
