Advertisement
How to Convert
the Range for use with
LP/Propane
Gas
Electrical
Shock
Hazard
can occur
and
result
in serious
injury or death.
Disconnect
electrical
power
to the range
before
removing
the warmer
drawer
for servicing.
1. Access
gas regulator:
To access the gas regulator, remove the storage drawer or
warmer drawer. If equipped with a storage drawer, open and
remove the drawer completely. For models equipped with
a front panel, remove the front panel and skip steps a & b
below. For models equipped with warmer drawer, follow all the
instructions below to remove the warmer drawer.
NOTE: Do not attempt to convert models that feature a lower
oven.
a. Locate glide lever on each side of drawer, pull up on the
left glide lever and push down on the right glide lever
(See Fig. 1).
b. Pull the drawer away from the range.
2. Convert
the pressure
regulator:
Electrical
Shock
Hazard
can occur
and
result
in serious
injury or death,
Disconnect
electrical
power
to the range
before
removing
the warmer
drawer
for servicing.
a. Remove the pressure regulator access cover (if equipped).
DO NOT REMOVE the pressure regulator or allow it to turn.
b. Remove the dust protector from the cap (See Fig. 2 -
some models). Use a wrench to remove the cap from the
pressure regulator (all models). Remove any gaskets.
c.
Follow the remaining conversion instructions depending on
your pressure regulator style provided in Figs. 3 or 4. Once
set for L.R/Propane replace gasket and cap then tighten.
Left-hand rail release
Right-hand ra tit/release
Fig. 1
Remove storage drawer
for front access to
pressure regulator.
Pressure regulator
Fig. 2
Remove Dust Protector
while converting. When
finished replace over cap.
Place hollow end
Place solid end
towards regulator
towards regulator
for NATURAL GAS.
for L.R/PROPANE.
Cap
Turn Conversion Plug 1/4 turn
to remove or lock in Cap.
Place hollow end of cap
towards regulator for
NATURAL GAS. When
finished replace & tighten
using gasket.
Fig. 3
Place solid end of cap
towards regulator for
L.P./PROPANE. When
finished replace & tighten
using gasket.
Conversion
Plug
Ga
Fig. 4
Advertisement
