Correcting Misalignment For Printing And Cutting When Using Crop Marks - Roland XC-540 User Manual

Correcting Misalignment for Printing and Cutting When Using Crop Marks

Procedure
1.
Check the setting for the [AUTO ENV. MATCH] menu item.
Make sure the [AUTO ENV. MATCH] menu item is set to "ENABLE."
P.84 "Making the Setting for Automatic Adjustment of the Printer to the Operating Environment"
2.
Execute the [ADJUST BI-DIR] menu item.
–
Load the media.
P.30 "How to Load Media"
P.90 "How to Load Sheet Media"
—
Perform bidirectional adjustment.
P.100 "Correcting for Misalignment in Bidirectional Printing"
P.101 "Correcting for Misalignment in Bidirectional Printing More Precisely"
3.
Print a test pattern and cut it.
–
MENU
CUTTING MENU
—
CUTTING MENU
CROP - CUT ADJ .
˜
CROP - CUT ADJ .
TEST PRINT
Cutting position and print-
ing position are misaligned
When adjustment is needed, go on to the steps below.
4.
Print a test pattern and cut it.
CROP - CUT ADJ .
TEST PRINT 2
6-7 Correcting Misalignment for Printing or Cutting
Press .
Press .
Press .
Press .
Press .
Press .
Cutting position
Printing position
Press twice.
Press to execute.
Cutting position
Printing position
Cutting position and print-
ing position are aligned
Chapter 6 Feature Reference 107