If Ink Runs Out - Roland XC-540 User Manual

If Ink Runs Out

When ink runs out, a warning beep sounds and printing pauses (unless the default settings have been changed). Pull
out the empty cartridge and insert a new one. Printing resumes.
Procedure
–
1 2
5 6
—
˜
Pull out the empty cartridge and immediately insert the new one.
➢ Keep the labeled side face up.
➢ Insert and remove slowly, one at a time.
➢ Insert firmly, as far as it will go.
Important Notes on Replacing Cartridges
➢ Be sure to replace with an item of identical type. Never mix items of different types.
➢ Never allow the machine to stand with an ink cartridge removed. The print heads may become clogged.
➢ Never insert or remove a partially used ink cartridge.
➢ Never remove an ink cartridge suddenly while the printer is in operation.
➢ When printing is paused, the coloring at the seam may be altered when printing resumes. Before you perform
lengthy printing, check the amount of ink remaining in the ink cartridges.
WARNING Never store ink, maintenance fluid, or discharged fluid in any of the following loca-
tions.
➢ Any location exposed to open flame
➢ Any location where high temperature may occur
➢ Near bleach or any other such oxidizing agent or explosive material
➢ Any location within the reach of children
Fire may be a danger. Accidental ingestion by children may pose a health hazard.
The slot number for the empty cartridge flashes.
3 4
7 8
Gently shake the new cartridge.
Replace with an item of identical
type and color.
Chapter 2 Operation
2-5 If Ink Runs Out
43