Advertisement
Setting Oven
Controls
Setting
the Oven
Lock
The o_ controls
the oven lock feature.
The oven lock automati-
LOCK
cally
locks the oven door and prevents
the oven from
being
turned on. It does not disable
the cooktop,
clock,
timer or the
interior
oven light. The ovens can be locked
individually.
To activate
the oven lock feature:
1.
Press Upper
or Lower Oven.
2.
Press and hold
o_ for 3 seconds.
LOCK
3.
After 3 seconds, DOOR,
LOCKED
will flash and Loc will
appear
in the display.
Once the oven door is locked
the DOOR
and LOCKED
indicator
will stop flashing
and remain
in the display.
Allow
15 seconds for
the oven door to lock completely.
To reactivate
normal
oven operation
by unlocking
door:
1.
Press Upper
or Lower Oven.
2.
Press and hold ova,
_ for 3 seconds.
Loc will disappear
from
LOCK
the display.
DOOR
and LOCKED
will flash in the display
until the door
has completely
unlocked
and the oven will be
operational.
The oven lock can be set for one oven or both.
An unlocked
oven may be used if the other
is locked.
Operating
Oven Light
The interior
oven light will automatically
turn on when the oven
door is opened.
Press (_
to turn the interior
oven light on and
off whenever
the oven _oor is closed.
Important
note: The oven light will not operate
during
self clean.
The interior
oven light is located
on the left wall of the oven
interior
and covered
with a glass shield to protect
the bulb from
high temperatures.
The shield should
always
be in place
whenever
the oven is in use. To replace
the interior
oven light,
see Replacing
oven lights in the Care and Cleaning
section.
Setting Temperature
Display -- Fahrenheit
or Celsius
The Broil and Self Clean
keys control
the Fahrenheit
or Celsius
temperature
display
modes. The oven can be programmed
to
display
temperatures
in Fahrenheit
or Celsius. The oven has been
preset at the factory
to display
in Fahrenheit.
Both ovens will be
changed
at the same time.
To change
display from Celsius to Fahrenheit
or Fahrenheit
to
Celsius:
1.
Press and hold the Broil key for about
6 seconds
until it
beeps: F or C appears
in the display.
The F means the oven
is set for Fahrenheit
and C means the oven is set for Celsius.
Figure 22:
The display will show the temperature
setting for
Fahrenheit
or Celsius
2.
Press Self Clean to toggle
between
Fahrenheit
or Celsius
modes.
3.
Press_to
accept
the change
or press_
to reject the
change.
Setting Silent Control Operation
The Self Clean
and Delay
Start keys are used to set the silent
control
operation
which allows
the oven to be operated
without
sounds whenever
necessary.
The control
can be returned
to
operating
with all the normal
sounds and beeps.
To change
from
normal
sound
to silent
operation:
1.
Press and hold Delay Start for 6 seconds.
The display
will
show dashes
and then change
to bEEP On in the display.
Figure 23: Audible
operation
(L) Silent operation
(R)
2.
Press Self Clean to switch
between
normal
sound operation
and silent mode.
to accept
the change
or press _
to reject
3.
Press
the
v
change.
Note: In silent operation
the control
will still beep at the end of a
timer and when a set temperature
has been reached.
19
Advertisement
