Advertisement
Setting Oven
Controls
Setting
the Clock
The Q
key is used to set the clock. The clock
may be set for 12
or 24 hour time of day operation.
The clock
has been preset
at
the factory
for the 12 hour operation.
When
the range is
plugged
in, or when the power
supply
to the range has been
interrupted,
the time in the display
will flash.
Press _.
The display
will stop flashing.
Example:
Setting
the clock for 1:30:
1.
Press Q.
CLO will appear
in the display.
2.
Press 1 3 0 using the numeric
keypad
to set time of day.
3.
Press
B
4.
Time of day will now appear
in the display.
Setting Minute Timer
The Timer ON/OFF
controls
the timer
that can be used during
any of the other oven control
functions,
except
self clean and
Sabbath.
It does not start or stop any cooking
function.
To set Timer for 5 minutes:
1.
Press Timer ON/OFF.
When
dashes
appear
in the display
the number 5 key and press (ST_)" The time will begin
press
to count down.
Figure 20:
Setting
timer
for 5 minutes
2.
When
timer
runs out, End and TIMER show in display.
The
clock will beep three times every 7 seconds until Timer ON/
OFF is pressed.
Press Timer ON/OFF
to cancel
the timer at
any time.
To Set Add 1 Minute
The Add
1 Minute
key is used to set the Add
1 Minute
feature.
When
the key is pressed,
1 minute
is added
to the timer
if
already
active.
If the timer
is not active
and Add
1 Minute
is
pressed, the timer
will start and will begin counting
down from 1
minute.
Each press of the key will add 1 minute to the timer.
Changing
Between
12 or 24 Hour
Time
of Day
1.
Press and hold Q
for about
6 seconds
until 12 Hr day or
24 Hr day appears
in the display.
2.
Press Self Clean
to switch
between
the 12 and 24 hour time
of day displays.
The display
will show either 12 Hr of 24 Hr.
3.
Press _to
accept
the change
or press _to
reject.
4.
Reset the correct
time as prescribed
in "Setting the Clock".
Note: if the 24 hour time of day was selected,
the clock will now
display
time from 0:00
through
23:59
hours.
Setting
Continuous
Bake or 12 Hour
Energy
Saving
The Timer ON/OFF
and Self Clean
keys control
the continuous
bake or 12 hour energy
saving
features.
The oven control
has a
factory
preset 12 hour energy
saving feature
that turns off the
oven if left on for more than 11 hours and 59 minutes.
The oven
can be programed
to override
this for continuous
baking.
To set the Continuous
Bake or 12 Hour Energy feature:
1.
Press and hold Timer ON/OFF
for about
6 seconds.
The
display
will show either
12 Hr OFF or Stay On and the
control
will beep once.
Figure 21: Display shows energy saving or continuous
cooking
2.
Press Self Clean to switch
between
the 12 hour energy
saving
and continuous
bake features.
Note: 12 Hr OFF indicates
the control
is set for the 12 hour
energy
saving mode.
Stay On indicates
the control
is set for the
continuous
baking.
3.
Press _
to accept
your selection
and the display
will
return to show the time of day.
18
Advertisement
