Advertisement
Before Setting Oven
Controls
The Glide Rack
The glide
rack is an extendable
rack that makes food
prepara-
tion easier. It has glide tracks that allow the rack to be pulled
away
from the oven without
rubbing
the sides of the oven wall.
Removing
and replacing
the glide racks
To remove
the glide rack:
1. Lift up on the release
lever located
across
the lower front of
the rack, as shown in Figure 17.
2. While
holding
up the release
lever (Figure
18), pull the glide
rack out of the oven until the stop position
is reached,
use two
hands if necessary.
3. Using both
hands, grasp
the upper and lower portions
of the
glide
rack (Figure
19).
4. Lift up the front of the rack slightly
and continue
to pull the
rack away
from the oven.
5. Be sure to grasp
both
upper and lower rack portions
together
when removing
or handling
the glide rack.
The rack portions
move independently
and are difficult
to handle
unless held
together..
Figure 17: Extendable
glide rack with release
lever in locked
position
t
To replace
the glide
rack:
1.
Grasp
both upper and lower portions
of the glide
rack
(Figure
19).
2.
Lift and hold the rack level between
the oven cavity
walls.
3.
Tilt the front of the rack upward
slightly
and slide the rack
completely
into position.
Some force
may be necessary
to
make
sure the oven
rack
has snapped
into
place.
Figure 19: Removing
and replacing
glide
rack from
oven
Air Circulation
in the Oven
For best baking
results allow
2-4"
(5-10 cm) around
the
cookware
for proper
air circulation
and be sure pans and
cookware
do not touch each other, the oven door, sides or back
of the oven cavity.
Hot air must be able
to circulate
around
the
cookware
in the oven for even heat to reach around
the food.
Figure 18: Glide
rack with release
rack in unlocked
position
16
Advertisement
