Download Print this page

Jenn-Air JES1450CDS0 Installation Instructions Manual page 5

30" (76.0 cm) slide-in electric ranges

Advertisement

Available languages

Available languages

Cabinet
Dimensions
Cabinet opening dimensions shown are for 25" (64.0 cm) countertop
depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm)
countertop height.
IMPORTANT:
If installing a range hood or microwave hood combination
above the range, follow the range hood or microwave hood
combination
installation instructions for dimensional clearances above the cooktop surface.
Range may be installed next to combustible walls with zero clearance.
NOTE: When installed in a slide-in cutout, the front of oven door may protrude beyond the base cabinet.
Slide-in
Cutout
,L
\
A. 18" (45. 7 cm) upper side cabinet to countertop
B. 13" (33 cm) max. upper cabinet depth
C. 30" (76.2 cm) min. opening width
D. For minimum
clearance to top of cooktop, see NOTE*.
E. In U.S.A.: 30" (76.2 cm) min. opening width
In Canada: 31" (78.7 cm) min. opening width
E The shaded area is recommended
for installation of grounded
outlet.
G. 13 _" (33.3 cm)
H. 71¼_,,(19.5 cm)
I. 4 1_,, (12.2 cm)
J. 3 1¼_,, ( 9.4 cm) or measurement
of L, whichever is greater
K. Cabinet door or hinges should not extend into the cutout.
L. Remaining counter depth should not exceed 2_ " (5.7 cm)
Freestanding
cutout
I
!
J
A. 18" (45.7 cm) upper side cabinet to countertop
B. 13" (33 cm) max. upper cabinet depth
C. 30" (76.2 cm) min. opening width
D. For minimum clearance to top of cooktop, see NOTE*.
E. In U.S.A.: 30" (76.2 cm) min. opening width
In Canada: 31" (78.7 cm) min. opening width
E The shaded area is recommended
for installation of grounded
outlet.
G. 13 _" (33.3 cm)
H. 71_,, (19.5 cm)
I. 41_,, (12.2 cm)
J. 31_,, (9.4 cm)
K. Cabinet door or hinges should not extend into the cutout.
*NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is shielded by not less than 1/4"(0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020"
(0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.

Advertisement

loading

This manual is also suitable for:

Jes1450cdb0Jes1450ds0Jes1450db0