Mitsubishi Electric PUMY-P112VKM1 Service Manual page 153

OPERATING PROCEDURE
13. Removing the reactor (DCL)
(1) Remove the service panel. (See Photo 1)
(2) Disconnect the lead wires from the reactor.
(3) Remove the 4 screws, that fix the reactor box.
(See Photo 13)
(4) Remove the reactor box.
Note 1: The reactor is very heavy! Be careful when handling it.
OCH576
Photo 13
Reactor box
Screws
Screws
153
PHOTOS
4-way valve
Reactor