Step/4, Install Dispenser Trim - GE ZIS360NXD Installation Instructions Manual

ZKHSS2 Tubular Stainless Steel Handles
[STEP 3 INSTALL ASSEMBLED HANDLES
. Slide the assembled panels into the door trim.
. Secure both trims using all the original screws.
Dispenser Models Only:
, The dispenser controls protrude beyond the face of
the freezer door. To avoid damage to the dispenser,
the trim at the top of the door should be removed.
. Remove the screws holding the top trim in place.
Lift off the trim.
. Place the freezer panel into the bottom channel
and slide into the hinge side trim.
. Reinstall the top trim piece with screws.
Reinstall all original screws
[STEP 4] INSTALL DISPENSER TRIM
For Dispenser Models Only:
There are two dispenser trims shipped with your
dispenser refrigerator. Note that the inside depth
of the frames are different. Choose the trim marked
3/4" overlay panels.
, Press and snap the dispenser trim into the dispenser
recess on the door.
IUlspense_
rh Trim
22