KitchenAid KDRS505XSS04 Installation Instructions Manual page 19

s
Tip Over Hazard
A child or adult can tip the range and be killed.
Install anti-tip bracket to floor or wall per installation
instructions.
Slide range back so rear range foot is engaged in the
slot of the anti-tip bracket.
Re-engage anti-tip bracket if range is moved.
Do not operate range without anti-tip bracket installed
and engaged.
Failure to follow these instructions can result in death
or serious burns to children and adults.
2. Unscrew the regulator cap and remove the plastic cover.
/
A. Plastic cover
B. Regulator cap
3. Flip the regulator cap over and replace the plastic cover.
1. Turn manual shutoff valve to the closed position.
.................. S
_ ............. ...................... C
A. Torange
B. Shutoff valve (closed position)
C. Gas supply line
2. Unplug range or disconnect power.
To Convert Gas Pressure Regulator
1. Locate gas pressure regulator at the rear of the range.
A. LP gas position
B. Natural gas position
C. Plastic cover
4. Screw the regulator cap securely back into place. Do not
overtighten.
To Convert Surface Burners
1. If the burner grates are installed, remove them.
2. Remove the burner caps.
3. Using a Phillips or T20 ®Torx®tscrewdriver, remove the burner
base.
A. Gas pressure regulator
IMPORTANT: Do not remove the gas pressure regulator.
A. Burner cap C. Burner base screws
B. Gas tube opening D. Burner base
19