Remote I/O Systems - Panasonic FP2 Series Product Manual

Remote I/O Systems

Flexible Layout of I/O Devices
 Remote I/O systems
MEWNET-F mode
The number of I/O points can be increased up to 819 and the transmission distance can be extended up to 00m by using the
multi-wire link units.

MEWNET-F is a remote I/O system that connects I/O units in separate locations with twisted-pair cables.

The remote I/O master unit serves as a master station. Slave stations can be selected from the units shown on the next page.

Up to four wiring routes are available, allowing for a flexible layout of slave stations.

This network system is ideal for cases where I/O units need to be installed in separate locations or in a location away from the
control box.
F mode
MW
FP multi-wire
link unit (F mode)

S-LINK

S-LINK is a link system that allows the free layout of I/O de-
vices, such as sensors, by T-branch connections with a four-
wire flat cable.

The number of I/O points can be increased up to 048 in in-
crements of one channel having 18 points.

A CPU unit with S-LINK ports and a single S-LINK unit are
available. FP-C1SL has two S-LINK ports and can control
56 I/O points.
S-LINK unit S-LINK CPU unit
FP-SL FP-C1SL

Sensors to be connected by S-LINK must be chosen from among
S-LINK-compatible sensors manufactured by SUNX Limited.
10 10
Twisted-pair cables or VCTF cables
FP0
control
FP I/O terminal
unit
board
09/2007
FP0 FPΣ FP0
I/O link I/O link
control
unit unit
unit
FP/FPSH
T-branch
multi-drop
wiring
Note: The number of I/O points may be less than 18 depending on the con-
nected device model and connection location. For details, refer to the
S-LINK instruction manual of SUNX Limited.
FP I/O terminal unit
Manifold
solenoid valve
FP/FPSH
S-LINK unit
Length: 00m max.
I/O points: 18 max.
Two signal lines
Two power lines