Advertisement
Smooth bright
Good for use on internal jobs where
there is no or very little exposure to
moisture. Use on non permanent
work such as shuttering.
Galvanised
The most popular as it gives good
protection against corrosion and can
be used for most applications.
Hot Dip Galvanised
Recommended for use on external
work or where corrosion could
damage the finish or integrity
of the joint.
Air filter
Protects cylinder from dirt and
debris to prevent malfunction.
Contact nose
5 stage depth adjustment
and anti slip contact.
Smooth
The most common nail, it can be
used for most joints.
Ring
Identified by the rings around the
shaft, these nails are generally used
where a very strong joint is required.
Unilock
A cross between Smooth and
Ring types, for use where a
medium strength joint is required.
Hook
Easily clipped on to
a belt or extends
to sit over small
joists and scaffolding.
44 nail magazine
Will hold 50mm - 90mm nails
with easy view quick load system.
Subject to
normal terms
and
conditions
Advertisement
