Front panel LEDs and buttons
Item
Description
Health LED
1
NIC status LED
2
UID button/LED
3
Power On/Standby button
4
and system power LED
* To identify components in a degraded or critical state, see the iLO/BIOS logs and the server troubleshooting guide.
** Facility power is not present, power cord is not attached, no power supplies are installed, power supply failure has
occurred, or the power button cable is disconnected.
Rear panel components
Item
Description
Slot 2 PCIe3 x8 (4, 1)
1
Slot 1 PCIe3 x16 (8, 4, 1)
2
Integrated power supply
3
NIC 1/shared iLO 4 connector
4
Video connector
5
NIC connector 2
6
USB 3.0 connectors
7
Dedicated iLO 4 connector
8
USB 2.0 connectors
9
Status
Solid green = Normal
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Fast-flashing red (4 Hz/cycles per sec) = Power fault*
Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
Solid blue = Activated
Flashing blue (1 Hz/cycle per sec) = Remote management or firmware
upgrade in progress
Off = Deactivated
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power on sequence
Solid amber = System in standby
Off = No power present**
Component identification 76