Troubleshooting - Nikon COOLPIX S7000 Reference Manual

Troubleshooting

If the camera fails to function as expected, check the list of common problems
below before consulting your retailer or Nikon-authorized service
representative.
Power, Display, Settings Issues
Problem
The camera is on
but does not
respond.
The camera
cannot be turned
on.
The camera turns
off without
warning.
The monitor is
blank.
The camera
becomes hot.
140
Cause/Solution
Wait for recording to end.
If the problem persists, turn the camera off.
If the camera does not turn off, remove and
reinsert the battery or batteries or, if you are
using an AC adapter, disconnect and reconnect
the AC adapter.
Note that although any data currently being
recorded will be lost, data that have already been
recorded will not be affected by removing or
disconnecting the power source.
The battery is exhausted.
The camera automatically turns off to save power
(auto off function).
The camera and battery may not work properly at
low temperatures.
The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
The camera is off.
The camera automatically turns off to save power
(auto off function).
The flash lamp flashes while the flash is charging.
Wait until charging is complete.
The camera is connected to a TV or computer.
The camera and smart device are connected
using a Wi-Fi connection and the camera is being
operated by remote control.
The camera may become hot when used for an
extended period of time to shoot movies or send
images, or when used in a hot environment; this is
not a malfunction.
A
–
7, 8, 133
14
132
–
10
14
–
–
–
–