Table of Contents
Advertisement
4. Operate the multi-color touch screen
Embroidering a single color segment
To embroider a single color segment of a design, touch
and select the color with the cursor arrows. Only the
selected color segment is shown on the screen.
Thread your Pfaff creative 2144, using the desired color.
Press the foot control, the presser foot is automatically
lowered to the embroidery position and your Pfaff creative
starts embroidering as descirbed in "One color embroidery"
"Jumping over stitches" when
embroidering a single color segment"
With the
icon you move the hoop to the start of the
next color segment of a design.
The color is indicated in the icon.
This function is active only when the same color is to be
embroidered twice in a design.
With the
icon you move the hoop to the start of the
preceding color segment in a design. The color is indicated
in the icon.
This function is active only when the same color is to be
embroidered twice in a design. In our design the sewing
machine is located at the start of the first color segment.
With the
icon you reposisition the needle to the start
of the current color.
Note : If you use the number input
the hoop, the hoop will move only within the selected color
segment.
• If the entered stitch number is too small for the selected
color segment, the embroidery hoop will move to the
start of the color segment.
• If the stitch number is too large, the embroidery hoop
will move to the end of the selected color segment.
In an embroidery combination, see "Embroidery combinati-
ons", you use the
icon to reverse and
ce the hoop design by design. You must set the color for
every single design.
Sewing with the
embroidery unit attached
It is possible to switch directly from embroidering to sewing
without having to remove the embroidery unit or take the
cards out of the drives.
However, you will have to remove the embroidery hoop.
Engage the feed dog and insert the required presser foot.
By touching
the main menu and can select a different stitch.
The embroidery unit moves to its right-hand position to lea-
ve the maximum amount of space for sewing.
This is only recommended for minor sewing jobs; for more
extensive sewing or when working on large pieces of fabric,
it is better to remove the embroidery unit.
Embroider monograms and
letters
On the creative card 300, you can find one single mono-
gram and two embroidery alphabets, used to create com-
binations.
Both single monograms and embroidery alphabets that
can be programmed into a combination can be saved on a
creative card/creative memory card.
The monogram is found in the folder "Framed" and the
embroidery alphabets are found in the folder "Alphabets"
Embroider a monogram that is stored on a card
The monograms are embroidered and can be adjusted in
the same way as described in "Embroider single designs"
(page 4-13 – 4-16).
for moving
Open the folder "Framed" on the creative Card 300.
Use the cursor icons to browse one column at a time to
select the desired letter.
to advan-
, you return to the choice of stitches in
4-19
Hide quick links:
Advertisement
Table of Contents
