Telephone operation
Handset locator
You can use the handset locator feature to find
misplaced handsets.
To start the paging tone:
•
Press
to start the paging tone on all handsets for
60 seconds.
To stop the paging tone:
•
Press
the handset(s).
-or-
•
Press
-or-
•
Place the handset in the telephone base or charger.
notes:
•
If you press
tone continues on the other handsets.
•
If a handset is accessing the answering system, on a call (intercom call or outside call), or out
of range, that handset does not beep when paged.
•
You cannot use the handset locator feature while the telephone base is playing messages or
the answering system is being accessed remotely.
on the telephone base
,
or any dialing key (0-9,
on the telephone base.
on a handset, the ringer of that handset is silenced but the paging
,
or #) on
28