Call Intercept; Temporarily Turn Off The Message Alert Tone - AT&T EL52265 User Manual

Answering system
Answering system overview

Call intercept

While call screening, you can stop the recording and speak to the caller.
• If the call is screened at the base, press
on the handset to stop recording and speak to the caller.
• If the call is screened at the handset, press
handset to stop recording and speak to the caller. You can press

Temporarily turn off the message alert tone

If the message alert tone is turned on, the telephone base beeps every ten
seconds when there are new messages. Pressing any telephone base key
(except
If you press
message alert tone, there is a voice prompt directing you to press
again to delete all old messages. The message alert tone is temporarily off.
Only press
your answering system.
The message alert tone resumes when you receive another message.
to switch between the speakerphone and the handset.
) temporarily silences the message alert tone.
when in idle mode to temporarily turn off the
a second time if you wish to erase all old messages in
63
or
on the