Toshiba e-STUDIO2050C High Security Mode Management Manual page 19

3.THE INITIAL VALUES
[Network] Sub Menu
Item
HTTP Network Service
Enable SSL*
SMTP Client
Enable SSL
Authentication
SMTP Server
Enable SMTP Server
POP3 Network Service
Enable SSL
FTP Client
Enable SSL
FTP Server
Enable FTP Server
Enable SSL
SNMP Network Service
Enable SNMP V1/V2
Enable SNMP V3
Web Services Setting
Enable SSL
Web Services Print
Web Services Scan
SLP Session
Enable SLP
SMB Session
SMB Server Protocol
Bonjour
Enable Bonjour
* The value can be changed in the [ADMIN] tab in the [User Function] mode in the touch panel of the equipment.
Initial value for the high
security mode
Enable
Verify with imported CA
certification(s)
AUTO
Disable
Verify with imported CA
certification(s)
Verify with imported CA
certification(s)
Enable
Enable
Disable
Enable
Enable
Enable
Disable
Enable
Enable
Enable
Remarks
The secure setting is "Verify with imported CA
certification(s)" or "Accept all certificates
without CA".
Be sure to confirm that one of "CRAM-MD5",
"Digest-MD5", "Kerberos" or "NTLM (IWA)" is
applied to your use environment.
Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable]
Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable].
Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable].
Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable].
Although [Enable] is set by default in the same
manner as the normal security mode, be sure
to set it to [Disable].
Precautions on the Initial Values
3 THE INITIAL VALUES
17