Fujitsu PRIMERGY RX200 S6 Operating Manual page 55

Racks with installation depth smaller/greater than 735 mm
The support systems can be used for installation depths of 714 - 785 mm. The
spring element of the support system is used to adjust the length as required.
Ê Secure the support systems as described in section
systems" on page
Ê Mount the server (see
cables as described in the original manual of the rack.
V
CAUTION!
Ensure that the safety lock has been inserted before the server is
inserted (see
RX200 S6
51.
"Preparing the server" on page
figure 5 on page
Operating Manual
Hardware installation
"Installing the support
52) and route the
51).
55