Fujitsu PRIMERGY RX200 S6 Operating Manual page 46

Hardware installation
PRIMECENTER Rack and DataCenter Rack provide an enhanced cable
management in the lateral rack area.
I
For PRIMECENTER Racks and DataCenter Racks:
The mounting of the rails in the different racks is described in the next
sections. Installation of the cable management is described in detail in
the Technical Manual for the respective rack.
I
For 19-inch standard rack (for the Japanese market):
For information on mounting of the rails in the 19-inch standard rack (for
the Japanese market) please refer to " はじめにお読みください ".
3rd party racks
Certain general conditions must be met:
– Installation dimensions (see the dimensions shown in
1 Front of rack
2 Rear of rack
A Rack depth (comparison PRIMECENTER Rack 940/1000/1100 mm)
B Rack width (comparison PRIMECENTER rack 700 mm)
C Clearance for 19" installation level
C1 Front 19" installation level
C2 Rear 19" installation level
D Cable routing area (cable area depth) and ventilation
E Space for front panel and ventilation
F Space for right and left support systems
P PRIMERGY server installation depth
a1 Front left support upright
a2 Front right support upright
b1 Rear left support upright
b2 Rear right support upright
46 Operating Manual
figure 2 on page 47):
RX200 S6