Fujitsu PRIMERGY RX200 S6 Operating Manual page 103

Ê Set the fan unit down on the outside of the server.
V
CAUTION!
Never set a removed/defective fan down inside the server. Risk of
short circuit!
Mounting is performed in the reverse order.
Figure 26: Installing the fans
When installing a new fan, first press down the side where the connections are
(1), and then press down the front (2).
I
The new fans are measured with explicit commands in Server
Management. Depending on the result, the corresponding LED is set to
orange (fan is not in order).
Ê Return the fan cover to its position (see section
cover" on page
RX200 S6
101).
Operating Manual
CSS components
"Opening/closing the fan
103