setup screen
camera setup
You can change the camera settings according to the environment where the camera is
located.
1. From the Setup menu, select the
<video & audio (
2. Click <camera setup>.
3. Configure the settings as necessary of :
Sensor, SSDR, White balance, Back light,
Exposure, Day/Night, Special, OSD, IR
4. When done, click [apply (
If a certain time (timeout: 240s) is elapsed with
`
your not pressing the [Apply (
button after changing the settings, your
changes will not be applied.
to Set the Sensor
It specifies how many frames the camera CMOS sensor will capture per second.
1. Select <Sensor>.
2. Select <mode>.
Refer to "Video profile" for the framerate
`
M
setup range of the <Video profile>
according to mode setup. (Page 81)
If the sensor mode is set to 50 fps or 60 fps, the <Back light> mode cannot be set to <WDR>.
`
88_ setup screen
)> tab.
)].
)]