When It Is Time For New - Buick 2012 Regal Owner's Manual

Hide thumbs Also See for 2012 Regal:
Table of Contents

Advertisement

Reset the Tire Pressure Monitor
System. See Tire Pressure
Monitor Operation on
page 10 56.
Check that all wheel nuts are
properly tightened. See Wheel
Nut Torque under Capacities
and Specifications on
page 12 2.
WARNING
Rust or dirt on a wheel, or on the
parts to which it is fastened, can
make wheel nuts become loose
after time. The wheel could come
off and cause an accident. When
changing a wheel, remove any
rust or dirt from places where the
wheel attaches to the vehicle.
WARNING (Continued)
In an emergency, a cloth or a
paper towel can be used;
however, use a scraper or wire
brush later to remove all rust
or dirt.
Lightly coat the center of the
wheel hub with wheel bearing
grease after a wheel change or
tire rotation to prevent corrosion
or rust build-up. Do not get
grease on the flat wheel
mounting surface or on the
wheel nuts or bolts.
When It Is Time for
New Tires
(Continued)
Factors such as maintenance,
temperatures, driving speeds,
vehicle loading, and road conditions
affect the wear rate of the tires.
Vehicle Care
Treadwear indicators are one way
to tell when it is time for new tires.
Treadwear indicators appear when
the tires have only 1.6 mm (1/16 in)
or less of tread remaining. See Tire
Inspection on page 10 60 and Tire
Rotation on page 10 60 for more
information.
The rubber in tires ages over
time. This also applies for the
spare tire, if the vehicle has
one, even if it is never used.
Multiple conditions including
temperatures, loading conditions,
and inflation pressure maintenance
affect how fast aging takes place.
10-61

Advertisement

Table of Contents
loading

Table of Contents