Compass; Clock - Buick 2012 Regal Owner's Manual

Hide thumbs Also See for 2012 Regal:
Table of Contents

Advertisement

Compass

There is a compass display in the
Driver Information Center (DIC).
The compass receives its heading
and other information from the
Global Positioning System (GPS)
antenna, StabiliTrak, and vehicle
speed information.
Avoid covering the GPS antenna for
long periods of time with objects
that may interfere with the antenna's
ability to receive a satellite signal.
See Backglass Antenna on
page 7 25 and Satellite Radio
Antenna on page 7 25 for the
location of the vehicle's antennas.
The compass system is designed to
operate for a certain number of
miles or degrees of turn before
needing a signal from the GPS
satellites. When the compass
display shows CAL, drive the
vehicle for a short distance in an
open area where it can receive a
GPS signal. The compass system
will automatically determine
when the GPS signal is restored
and provide a heading again.
See Compass Messages on
page 5 30 for more information
on the messages that may be
displayed for the compass.

Clock

The infotainment system controls
are used to access the time and
date settings through the menu
system. See Operation on
page 7 11 for information about
how to use the menu system.
Setting the Clock
(Radio with CD)
Setting the Time and Date
1. Press the CONFIG button and
select Time and Date Settings.
2. Select Set Time or Set Date.
3. Turn the Multifunction knob to
adjust the highlighted value.
Instruments and Controls
4. Press the Multifunction knob to
select the next value.
5. To save the time and return to
the Time Settings menu, press
the BACK button at any time or
press the Multifunction knob
after adjusting the minutes.
Setting the 12/24 Hour Format
1. Press the CONFIG button and
select Time and Date Settings.
2. Highlight 12/24 HR Format.
3. Press the Multifunction knob to
select the 12 hour or 24 hour
display format.
Setting the Month and Day Format
1. Press the CONFIG button and
select Time and Date Settings.
2. Highlight Month & Day format.
3. Press the Multifunction knob
to select the DD/MM/YYYY
(day/month/year), MM/DD/YYYY
(month/day/year), or YYYY/MM/
DD (year/month/day) display
format.
5-5

Advertisement

Table of Contents
loading

Table of Contents