Tire Designations - Buick 2012 Regal Owner's Manual

molded onto both sides of the
tire, although only one side may
have the date of manufacture.
(D) Maximum Cold Inflation
Load Limit Maximum load
:
that can be carried and the
maximum pressure needed to
support that load.
(E) Tire Inflation The
:
temporary use tire or compact
spare tire should be inflated to
420 kPa (60 psi). For more
information on tire pressure and
inflation see Tire Pressure on
page 10 53.
(F) Tire Size A combination of
:
letters and numbers define a
tire's width, height, aspect ratio,
construction type, and service
description. The letter T as the
first character in the tire size
means the tire is for temporary
use only.
(G) TPC Spec (Tire
Performance Criteria
Specification) Original
:
equipment tires designed to
GM's specific tire performance
criteria have a TPC specification
code molded onto the sidewall.
GM's TPC specifications meet
or exceed all federal safety
guidelines.

Tire Designations

Tire Size
The following is an example of
a typical passenger vehicle
tire size.
(A) Passenger (P Metric) Tire
The United States version of a
metric tire sizing system.
Vehicle Care
The letter P as the first
character in the tire size
means a passenger vehicle
tire engineered to standards
set by the U.S. Tire and Rim
Association.
(B) Tire Width
:
number indicates the tire
section width in millimeters
from sidewall to sidewall.
(C) Aspect Ratio
number that indicates the tire
height to width measurements.
For example, if the tire size
aspect ratio is 60, as shown
in item C of the illustration,
it would mean that the tire's
sidewall is 60 percent as high
as it is wide.
:
10-49
The three digit
A two digit
: