Lava Rock & Ember Material Placement; Flame & Temperature Adjustment - Majestic fireplaces 360DVS2 Homeowner's Installation And Operating Manual

360 DVS Series Direct Vent Fireplaces
Fig. 40 360DVS log placement.
Fig. 41 360DVS log placement.
Lava Rock and Ember Material Placement
Your log set contains Ember Material and two types of
Lava Rocks. Set these materials in place after the logs
have been installed.
Ember Material (Pt. #51915)
Remove ember material from the bag and separate it
into small pieces, then scatter it over burner tiles in a
random fashion. Do not pack down ember material;
leave it in a 'fluffy' state.
Lava Rock (Pt. #10001454)
Remove lav rock material from packaging and spread
it over ceramic floor panels outside log stack. Do not
place this lava rock material on burner tiles.
26
Side of Fireplace
B120
B125
B124
B123
Side of Fireplace
B121
LG320
360DVS
logs
B122
B126
LG321
360DVS
logs opposite side
B122
B126
B121
B123 B120
B125
Flame & Temperature Adjustment
RN/ RP Models
For units equipped with 'HI/LO' valves the flame adjust-
ment is accomplished by rotating the 'HI/LO' adjustment
knob located near the center of the gas control valve.
(Fig. 42 and Fig. 43)
Turn
counterclockwise
to decrease
flame height
Fig. 42 Flame adjustment knob for Honeywell valve.
LG320
LG321
Turn clockwise
to increase
flame height
10006326
HV102
Honeywell hi/lo knob
4/5/99 djt