Table of Contents
Advertisement
INSTALLER/CONSUMER
SAFETY INFORMATION
Read and save
these instructions.
This book contains your installation instruc-
tions and should be kept in a safe place. For
you to realize all the advantages and use of
the reliable service that has been engineered
into your fireplace, you must carefully follow
all of the instructions contained in this book
regarding installation and operation of the
fireplace.
These instructions should be read carefully in
their entirety before beginning installation of
the fireplace.
It is suggested that you wear work gloves
and safety glasses to protect your hands and
eyes when installing your fireplace. NOTE:
Authorities having jurisdiction (i.e. building
inspectors, fire marshals, etc.) should be
consulted before installation to determine the
need to obtain a permit.
When installing the Blower Kit, it is necessary
to bring the power source to the fireplace
before walls are enclosed. Refer to Blower
Kit instructions.
These fireboxes are approved as univer-
sal fireboxes and can be paired with any
ANSI Z21.11.2 approved vent-free log set.
The vent-free log manufacturer's instruc-
tions - including their required dimen-
sional clearances for firebox size, - must
be followed.
Refer to the manual that is packed with the
log set for operating instructions.
UVDC, UVDR
Ventless Fireplaces
Homeowner's Installation and
INSTALLER: Leave this manual with the appliance.
CONSUMER: Retain this manual for future reference.
72025
Operating Manual
ADL/ADF
362/425
cover
2/04
20007433 6/06 Rev. 5
Advertisement
Table of Contents
Related Manuals for Majestic fireplaces UVDC
Summary of Contents for Majestic fireplaces UVDC
-
Page 1: Safety Information
UVDC, UVDR Ventless Fireplaces INSTALLER/CONSUMER SAFETY INFORMATION Read and save these instructions. This book contains your installation instruc- tions and should be kept in a safe place. For you to realize all the advantages and use of the reliable service that has been engineered into your fireplace, you must carefully follow... -
Page 2: Table Of Contents
UVDC/UVDR Series Unvented Fireplaces Table of Contents Hearth Dimensions ........................2 Fireplace Dimensions ........................3 Installation Instructions ....................... 4 Choosing a location ......................4 Gas line ..........................4 Drafts ..........................4 Clearances ......................... 4 Installing the Firebox ......................5 Finishing the Fireplace ....................... 7 Hearth Extension ........................ -
Page 3: Fireplace Dimensions
Point Rough Opening Height 1/2” Clearance to Combustibles not Required at this Point 6���" Gas Line Access Fig. 1a UVDC/UVDR specifications and framing dimensions. 36” Louvred 36” Flush 42” Louvred 42” Flush 72025 ADF/ADL 36” 36” 42” 42”... -
Page 4: Installation Instructions
UVDC/UVDR Series Unvented Fireplaces Installation Instructions If the fireplace is to be installed on a raised wooden Choosing the Location platform, the platform must be a continuous level sur- for Your Fireplace face. The fireplace must be secured in place so it can- Figure 1 shows some of the many ways your fireplace... -
Page 5: Installing The Firebox
UVDC/UVDR Series Unvented Fireplaces Clearance to Combustible Clearance to Combustible Mantel Projections with- Mantel Projections with out Canopy Canopy 42" 5" Min. Combustible Per- pendicular Wall 10" Clearances without Canopy 6" 24" Min. Mantel (Combustible) Mantel (Combustible) Noncombustible 16" Projections (“) Projections (“) -
Page 6: Nailing Flanges
UVDC/UVDR Series Unvented Fireplaces The normal gas connection is 1/2” NPT, made at the left 1/2" side facing the unit. If a right side connection is desired, the connecting pipe must be led at the rear of the fire- place to terminate at the left hand side for connection to the fireplace. -
Page 7: Finishing The Fireplace
UVDC/UVDR Series Unvented Fireplaces WARNING: These vent free fireplaces are not to be Finishing Material used with glass doors. Stud Hearth Extension Noncombustible Material Insulation A hearth extension may be used but is not required for Caulking or Sealant these fireboxes. -
Page 8: Install Optional Outside Air Kit
UVDC/UVDR Series Unvented Fireplaces should be caulked around its perimeter to assure a Install Optional Outside Air Kit tight seal. The rain cap opening should be positioned The AKU3 Outside Air Kit can be installed to bring com- downward. (Fig. 13) bustion air to the heated room air. - Page 9 UVDC/UVDR Series Unvented Fireplaces Operating Precautions and Instructions Operation is automatic. A slight negative pressure inside the house will open the barometric flapper valve. Periodically inspect the duct termination for any block- age. Correct if necessary. KT145 Fig. 12 Secure the inlet collar assembly.
- Page 10 UVDC/UVDR Series Unvented Fireplaces CFM Corporation reserves the right to make changes in design, materials, specifications, prices and discontinue colors and products at any time, without notice. UVDC/UVDR Series Unvented Fireplaces Description UVDC36 UVDR36 UVDC42 UVDR42 7433 Firescreen Rod (2 per fireplace)
-
Page 11: Replacement Parts
Servicing prices and policies covering replacement parts. Parts Repair and replacement work should only be done by a may be ordered through your Majestic Fireplaces dis- qualified service person. tributor or dealer. Always shut off the gas supply and make sure the appli- You will need the correct name, part number and model ance is cool before beginning any service operation. -
Page 12: Warranty
LIMITED LIFETIME WARRANTY PRODUCT COVERED BY THIS WARRANTY All Vermont Castings gas stoves, gas inserts, and gas fireplaces, and all Majestic brand gas fireplaces equipped with an Insta-Flame Ceramic Burner, or standard steel tube burner. BASIC WARRANTY • Any part and/or component replaced under the provisions of this warranty is covered for six months or the remainder of the original CFM Corporation (hereinafter referred to collectively as the Company) warranty, whichever is longest.