Deleting An Entry Code; Deleting All Entry Codes - Chamberlain Min i-key 500 SN7000255 Programming Manual

Notes:
Relay Codes:
—
1 = Cycle Relay 1
2 = Cycle Relay 2
3 = Cycles Both Relays
4 = Release Both Relays
5 = Toggle Relay 1
6 = Toggle Relay 2
7 = Toggle Both Relays
Enter Timer Code "1" if you want an entry code to be restricted during the specified time.
—
Enter Timer Code "0" if you do not want an entry code to be restricted.

Deleting an Entry Code

1.
2. Entry Code (4 or 5 digits)
3.
Examples: 6 + 1234 + #
Deletes entry code "1234".

Deleting ALL Entry Codes

This programming step will delete all the entry codes from the unit's memory.
Important: Once you delete the codes, you cannot retrieve them.
1.
2.
3.
Cycle Relay: When someone enters a valid entry code, the relay will
energize for a set period of time (see page 5), then de-energize
(deactivate to re-lock the door). If the relay is normally energized, then
it will de-energize for the set time and then re-energize.
Release Relay: Returns relay action to default setting. If a relay is
toggled to stay energized (door is unlocked), releasing the relay will
de-energize it (door becomes locked).
Toggle Relay: Energizes a de-energized relay (or de-energizes an
energized relay) until released or toggled.
Page 7 of 8
Doc 6001050, Rev E
Entry Codes
— — —