Connection To An Audio System; Connection To An External Tuner - Magnavox DV225MG9 Owner's Manual

Connection to an Audio System

Playing 2 Channel Analog Audio
stereo system
RCA audio cable
DVD
AUDIO
OUT
DVD
L
DIGITAL DIGITAL AUDIO S-VIDEO
AUDIO OUT AUDIO OUT OUT OUT
L
COAXIAL COAXIAL
R
R
or
AUDIO OUT
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your
local store.

Connection to an External Tuner

rear of TV
AUDIO IN
L
R
VIDEO IN
AUDIO IN
L
R
VIDEO IN
Using the unit with an external tuner
1. Connect RCA audio and video cables to the audio and video
output jacks of your external tuner and to the audio and video
input jacks at the rear of the unit.
2. Press [INPUT] on your remote control until "L1" is displayed on
your TV.
Note:
• Your cable/satellite box can be accessed only by connecting it to L1
(rear panel jacks) of the unit. Even if the unit is turned off, the signal
from the external tuner is output to the TV through the unit.
L1: Rear panel terminals
L2: Front panel terminals
Refer to "Front & Rear Terminals" on page 9 for more information.
EN
analog audio
L R
input jacks
DVD/VCR VCR
AUDIO OUT
L
DVD/VCR VCR VCR
COMPONENT AUDIO OUT AUDIO IN AUDIO IN
VIDEO OUT
Y L L L
R
C B /
R R R
P B
VIDEO OUT VIDEO IN VIDEO IN
C R /
P
R
rear of the unit
DVD DVD/VCR
DIGITAL AUDIO S-VIDEO COMPONENT AUDIO OUT
VIDEO OUT
AUDIO OUT OUT OUT
Y
L
C B /
P B
COAXIAL
R
C R /
P R
RCA audio cable
RCA video cable
Playing Multi Channel Digital Audio
Dolby Digital decoder,
Audio
MD deck or DAT deck
digital audio coaxial cable
This unit
Connection
Connecting to a Dolby Digital decoder
for Dolby Digital audio output.
Connecting to other device (an MD deck
or DAT deck etc.) without Dolby Digital
decoder.
* To complete these settings, refer to pages 20-21.
Note:
• The audio source on a disc in a Dolby Digital multi channel surround
format cannot be recorded as digital sound by an MD or DAT deck.
• By hooking this unit up to a Dolby Digital decoder, you can enjoy
high-quality Dolby Digital multi channel surround sound as heard in the
movie theaters.
• Playing back a DVD using incorrect settings may generate noise distor-
tion and may also damage the speakers.
VCR
AUDIO IN
L L
R R
L1
VIDEO OUT VIDEO IN
DVD/VCR VCR
AUDIO OUT AUDIO IN
L L
R R
VIDEO OUT VIDEO IN
Supplied cables used in this connection are as follows:
• RCA audio cable (L/R) x 1
• RCA video cable x 1
Please purchase the rest of the necessary cables at your
local store.
Special note when connected to an external tuner:
• Only the active channel on your external tuner may be viewed or
recorded when connected to this unit.
Do not change channels during a recording. You cannot record
on channel while viewing another.
• Always use the LEFT (white) audio output jack from the external
tuner to ensure that the audio is mixed down correctly to mono
for this unit. If you use the RIGHT (red) jack, you will record the
right audio only.
– 7 –
digital audio
COAXIAL
input jack
DVD
COMPONENT
DIGITAL AUDIO S-VIDEO
VIDEO OUT
OUT OUT
AUDIO OUT
COAXIAL
DIGITAL AUDIO OUT
Setting
SETUP > QUICK >
DOLBY DIGITAL
BITSTREAM
external tuner
(cable/satellite box)
AUDIO OUT
RCA audio cable
VIDEO OUT
RCA video cable
PCM
L
R