Connection To An Audio System - Magnavox MWR20V6 Owner's Manual

• When you change the connections, all devices should be turned off.
• Refer to the operation manual accompanying external devices for more information.
Method 1
Stereo system
AUDIO
Audio cable
(supplied)
This unit
<REAR PANEL>
AUDIO OUT
Note
• Playing back a DVD using incorrect settings
may generate noise distortion and may also
damage the speakers.
16 EN
Connections

Connection to an Audio System

Analog audio
input jacks
DVD/VCR
IN - AUDIO - OUT
L
R
or
DVD
AUDIO
OUT
Connection
L
If output is Dolby Digital
R encoded audio, connect to a
Dolby Digital decoder.
Unless connected to a Dolby
Digital decoder.
Connecting to an MD deck or
DAT deck.
Note
• By connecting this unit to a Multi-channel Dolby Digital
• The audio source on a disc in a Dolby Digital Multi-
• Playing back a DVD using incorrect settings may
Method 2
Dolby Digital decoder,
MD deck or DAT deck
COAXIAL
Audio Coaxial Digital cable
(commercially available)
DIGITAL
AUDIO OUT
Setting
* To complete these settings, refer to pages 69-70.
decoder, you can enjoy high-quality Dolby Digital Multi-
channel surround sound as heard in the movie theaters.
channel surround format cannot be recorded as digital
sound by an MD or DAT deck.
generate noise distortion and may also damage the
speakers.
Digital audio
input jack
DVD
DIGITAL
AUDIO OUT
COAXIAL
Setup>Playback>Disc Audio>Digital Out>
PCM Dolby Digital
- STREAM
PCM
-
PCM
-